Press Releases - News and information from Otacell

Troubleshooting if the uinit light is red or can't be communicated with

Otacell 20/01/2026 0

Below you will find troubleshooting information for situations where your device does not connect, shows a red indicator, or cannot be communicated with. This information applies to all products except OTAC-AG, where the SIM card is provided by us and therefore must not be replaced or removed. If you are using an older device (article number starting with GSMS-), we recommend that you first review the information about the 2G network and how it affects our older products. Read more about this he...

Documentation and Manuals for Otacell / GSM-START Products

Otacell 10/01/2026 0

At Otacell.se you will find reliable and user-friendly solutions for remote control and monitoring over the mobile network, developed and manufactured in Sweden for maximum operational reliability and durability. Whether you control the heating in your holiday home, the parking heater in your car, or electrical equipment remotely with our 4G-controlled relays, proper documentation and manuals are the key to easy installation and trouble-free use. Current OTACELL 4G devices: OTAC-SW22T USER MANU...

Information on replacing your old 2G device with the current 4G variant

Otacell 01/01/2026 0

Below is information if you want to replace your old 2G unit with the current 4G unit. We do not sell upgrade kits or similar; instead, you need to purchase a new unit and replace the old one. Start by reading this information about the 2G network and our units. The first step is to find out whether you have an older 2G/GSM model or a newer 4G model. This can be seen from the article number. Article numbers starting with GSMS- use the 2G/GSM network and need to be replaced sooner or later. For e...

How to prevent corrosion in cable connections

Otacell 29/10/2025 0

When electrical conductors are connected in terminal blocks or screw clamps, the choice of materials is critical for long service life and safety. The wrong combination can lead to corrosion, increased contact resistance, and in the worst case overheating. Here is what you need to know. Materials in our terminal blocks The terminal block we use in OTAC-SW22T is built with:Screws: Steel, zinc-platedSpring: Phosphor bronze, nickel-platedConductor clamp: Brass, nickel-platedPlastic: PBT, flame-re...

Will my OTACELL/GSM-START device be affected when the 2G/3G network shuts down?

Otacell 01/10/2025 0

Our older remote control units use the 2G network, often referred to as the GSM network. Our current model uses the 4G network, which is designed to operate in parallel with 5G for many years. This means that units with 4G support are well prepared for the future. Across the EU, mobile operators are gradually shutting down 2G and 3G networks. The exact timetable and affected technologies vary between countries and between operators. Some operators may shut down 3G first and keep 2G running for a...

Not available in english right now

Otacell 25/03/2025 0

Not available in english right now...

GSMS Remote Control Android APP and Google messages

Otacell 14/10/2024 0

After the latest GSMS Remote Control Android app update it now works correctly with Google messages. It is important though that Google messages is configured to send SMS and not RCS messages to the unit! Change this by clicking on the three dots in the upper right corner and go to. Then activate the setting for "Only send SMS and MMS messages". ...

GSM-STAR.SE is now OTACELL.SE!

Otacell 24/01/2023 0

After 10 years on the market we now change name to Otacell. With this we also say thank you to and completely leave the 2G (GSM) network and continue with 4G and 5G! Still 100% Made in Sweden! ...